Fix: Epson Et 2720 Printer Troubleshooting

Epson printers offer you many different features to perform a task in an easier and smarter way. At times, it may trouble you with some obvious errors and thus stop you from the desired task. No problem. It can be resolved when you have the best solution with you. You can find the best solution on this page. Look here for a quick fix.

Epson ET2720 printer troubleshooting

To begin with, check whether your Epson ET 2720 printer is turned on. When your printer is not turned on, or if the power cord is not securely connected at both ends, you’ll not be able to print the documents. After checking with the printer, navigate to your Windows computer and set your printer as the default one. This might help you bring the printer back to its normal state. Here’s how to set the printer as the default one.

Setting your Epson ET2720 printer as the default tone

  1. On your Windows computer, click the Start menu.
  2. Type “Control Panel” in the search bar. From the search results, select Control Panel.
  3. Select Hardware and Sounds and then navigate to the Devices and Printers section.
  4. In that section, locate and right-click the printer icon.
  5. Select Set as default printer.
  6. By setting the printer as the default one, you’ll be able to fix the Epson ET 2720 printer problem.
  7. In case you have an issue with the ink cartridge, just look at this section for a quick fix.
  8. If the printer isn’t producing quality output, you have to check the ink levels. If you get a low ink alert from your Epson ET 2720 printer, you need to reset the ink level before you refill the ink tank.
  1. Ensure that you’ve turned on your printer.
  2. On the printer control panel, select Maintenance and press OK.
  3. Select Reset Ink Level and confirm the action by pressing the OK button.
  4. Open the ink tank cover.
  5. Locate the ink tank that you are going to fill and open its cap.
  6. Take out the new ink tank package and remove all the protective tapes from it.
  7. Hold the ink bottle upright and align it to the respective ink tank holder.
  8. Wait until the ink tank fills completely.
  9. Finally, close the ink tank cap and the ink tank cover.
  10. Resume the printing work. This time, your Epson ET 2720 printer should print properly.

If you face any print quality issue on your Epson ET-2770 printer, you can resolve that issue by cleaning the print head. Follow the instructions below to proceed further.

Cleaning the print head using your printer control panel

  1. To begin with, make sure that there are no errors on the LCD, and extend the output tray if it is not extended.
  2. Ensure that you’ve loaded enough paper in the paper tray.
  3. Now, press the Home button if necessary.
  1. Select the Maintenance option and then navigate to the Head Cleaning screen.
  2. Next, press the Start button. It cleans the print head. Later, run a nozzle check and ensure that the print head is clean now. Alternatively, you can also clean the print head using the printer driver.

Uninstalling the Epson ET 2720 printer software will mostly fix the problem whenever you face printing, copying, or scanning problems.

Uninstalling the printer software – Windows

  1. To begin with, turn off the printer.
  2. Close all the programs currently running on your computer. Additionally, disconnect the power cables that are attached to your printer.
  3. Now, click the Start menu and then select the Settings option.
  4. Select Apps or System and then the Apps &features option. You need to select the program that you want to uninstall. Next, select the Uninstall option.
  5. Click Continue if necessary. The uninstallation process begins now. Later, you just have to restart your computer.
  6. Turn it on again and begin the desired work that you were doing before.

Uninstalling the printer software – Mac

  1. It is simple to uninstall the printer software on your Mac computer. Look at this section.
  2. On your Mac computer, just navigate to the Downloads folder.
  3. Choose the required operating system and then click Utilities.
  4. Go to the Uninstaller utility and then click Download.
  1. Run the file, and you’ll have to double-click the Uninstaller icon.
  2. Finally, click the Uninstall option and follow the on-screen commands to complete the installation.
  3. Later, reinstall the printer software. Begin the desired work that you were doing before and check whether the Epson ET 2720 printer is performing well or not.

Sometimes, the printer might trouble you by going offline. So, refer to the steps given below to bring the printer back to online mode.

Resolving the Epson ET2720 printer offline issue

  1. On your Windows computer, click the Start menu.
  2. Type “Control Panel” in the search bar. From the search results, select the Control Panel option.
  3. Select Hardware and Sounds and then navigate to the Devices and Printers option.
  4. In that section, right-click the printer icon and then select See what’s printing.
  5. Go to the Printer menu.
  6. Select Cancel All Documents.
  7. The print jobs will be deleted now. By deleting the print jobs, you’ll be able to fix the printer problem.
  1. Additionally, disable the Use Printer Offline option. This could help you bring back the printer online.
  2. On your Windows computer, go to the Control Panel window.
  3. Select Hardware and Sounds and then navigate to the Devices and Printers section.
  4. In that section, locate and right-click your printer icon.
  5. Select See what’s printing and then go to the Printer menu.
  6. Check whether the Use Printer Offline option is selected or not. If it is enabled, disable it. This would bring back the offline printer to online.

That’s it. You’ve now seen how to fix your Epson ET 2720 printer problem. Apply these solutions to fix the problem faced by your Epson printer.