Epson Stylus NX415 Setup Guidance

The Epson Stylus NX415 printer supports printing, scanning, and copying. The only supported connectivity interface is a USB cable. The printing technology used is inkjet. To perform the Epson Stylus NX415 setup, perform the quick steps provided below.

  1. Unpack the Epson Stylus NX415 printer.
  2. Check if the product CD, manual, power cable, and ink cartridges are included in the printer box.
  3. Connect the power cable between the Epson printer and an electrical outlet.
  4. Press the On button to power up the printer. Press the up or down arrow button to choose your language and press OK.
  5. Install the new ink cartridges in the holder and then press OK.
  6. Wait until the printer charges the ink. It might take up to a maximum of 2 minutes.
  1. Note: You should not turn off the printer while the printer is charging the ink.
  2. Load the required number of paper into the feeder and adjust the edge guide according to the paper dimension.
  3. Place the printer software installation CD in your computer’s CD drive.
  4. Click the Install option and carry out the steps on the screen to install the printer software. 
  5. Lastly, register the printer. Once done, remove the installation CD.

Epson Stylus NX415 Windows 10 Driver

Driver Download 

  1. To download the Epson Stylus NX415 setup driver on your Windows 10 computer, click the Driver Download button on this page.
  2. Alternatively, download the Drivers and Utilities Combo Package file from the manufacturer website.

Driver Install

  1. Open the downloaded printer driver file.
  2. Carry out the on-screen steps to install the printer driver on the Windows 10 computer.

Epson Stylus NX415 Mac Driver

Driver Download

  1. Click Driver Download available on this page to download the Epson Stylus NX415 printer driver on your Mac computer.
  2. Also, you can download the printer file from the official Epson website.

Driver Install

  1. Locate the Epson icon in the Downloads folder.
  2. Click the Install button and continue with the prompts.
  3. While installing, choose your connection type and establish a connection between the printer and the Mac computer.
  4. Once done with the installation, eject the installation CD.

Epson Stylus NX415 User Manual Download

Method 1 – Download from this page

To download the Epson Stylus NX415 setup manual on your computer, click the Manual Download button on this page.

Method 2 – Download from the Epson website

  1. Access the Epson website and navigate to the Manuals and Warranty section.
  2. You will see the Start Here, User’s Guide, Product Brochure, Quick Guide and Warranty, and Safety Data Sheets documents on the screen.
  3. Choose the manual and download it. It is saved in your computer’s Downloads folder.

How to Install Epson Stylus NX415 Without CD?

  1. If your computer does not have a CD drive, download the Epson Stylus NX415 printer driver from the Epson website.
  2. To run the downloaded file, open the Downloads folder on your computer and double-click the file.
  3. When the installation wizard starts, click the Install option and proceed with the prompts.
  4. Choose the Install driver for USB connection option in the Software Installation window. 
  5. Connect a USB cable between the Epson Stylus NX415 setup and the computer when prompted.
  6. Carry out the remaining steps on the screen to finish the installation.

Epson Stylus NX415 Wireless Setup

The Epson Stylus NX415 printer does not come with a built-in wireless feature. It does not support a wireless or Ethernet connection to a router. You can only connect the Epson Stylus NX415 setup to your computer using a USB cable.

To perform the network setup, carry out the steps given below. 

  1. If you have not installed the printer software on your computer yet, insert the installation CD into your computer’s CD drive.
  2. Click Install and follow the prompts. Select the Install driver for USB connection option and click Next in the Software installation window.
  3. Use a USB cable for connecting the printer to the computer.

Windows Vista

  1. Launch Control Panel, navigate to Hardware and sound, and click Printer.
  2. Right-click the Epson Stylus NX415 printer icon and select the Sharing option.
  3. Click Change sharing options -> Continue -> Share this printer.
  4. Enter a name for the shared printer and click the OK option.
  5. You can access the shared Epson printer from computers on the network.

How To Change Epson Stylus NX415 Ink Cartridge?

  1. Turn on the Epson Stylus NX415 setup.
  2. On the printer’s control panel, press the Setup button.
  3. Use the navigation buttons to select the Maintenance option and then press the OK button.
  4. Select the Change Ink Cartridge option and press OK.
  5. Lift the scanner and raise the cartridge cover.
  6. Take out the used ink cartridge from the holder and dispose of it.
  7. Shake a new ink cartridge and then remove it from the package.
  8. Peel off the yellow tape from the ink cartridge.
  9. Insert the unpacked ink cartridge into the holder.
  10. Perform the same to change the remaining ink cartridges if necessary.
  11. After replacing the ink cartridges, close the cartridge cover followed by the scanner.
  12. Press OK on the control panel and then wait until the printer finishes charging the ink.

Steps: Epson Stylus NX415 Clean Print Heads

If the print quality is declining or nozzles clogged, you have to clean the Epson Stylus NX415 setup’s print head as per the following steps.

  1. Place some letter or A4 size paper in the printer’s sheet feeder.
  2. Press Setup. Select the Maintenance option and press OK.
  3. Choose the Head Cleaning option and press OK.
  4. To start the print head cleaning, press the Start button.
  5. Once done with the print head cleaning, you will see a message on the display panel.
  6. Print a nozzle check pattern and check if the print head is clean.

How to Scan on Epson Stylus NX415?

To scan a file and save it on your computer as a PDF, follow the steps.

  1. On the Epson Stylus NX415 setup’s scanner glass, place your original.
  2. Open the Epson Scan program.
  3. Navigate to the Mode drop-down menu and choose Home Mode, Office Mode, or Professional Mode.
  4. Set your document type and destination and click the Scan button.
  5. Choose PDF (*pdf) from the Type drop-down menu and click OK.
  6. Select the Save File option. 
  7. To scan a multi-page document, select the Add page option. Place the next page of the document on the scanner glass and click Scan.
  8. Once done with the scanning, close the Epson Scan program.
  9. Now, you can view the scanned document in Adobe Acrobat.

Epson Stylus NX415 Scan to Computer

  1. Lift-open the Epson Stylus NX415 setup’s document cover.
  2. Place your original document with its print-side face down on the scanner glass.
  3. Close the document cover properly.
  4. Launch the Epson Scan application on your computer. 
  5. Choose the Full Auto Mode option from the Mode drop-down menu. It will detect the document type and other scan settings automatically.
  6. To change the scan settings, restore faded color, or remove dust marks, click the Customize button.
  7. Click the Scan option to scan the document. Once done, the scanned document will be saved on the computer.

Epson Stylus NX415 Scanner Software

  1. You have to install the scanner software to scan from your computer. The Drivers and Utilities Combo Package contains Epson Stylus NX415 setup Driver, Scanner Driver, Epson Status Monitor, and Epson EasyPrint.
  2. You can download this manufacturer-recommended file from the official Epson website.
  3. After downloading it, open it and follow the steps on the screen to finish the installation.
  4. Once done, you can use the scanning program to scan on the Epson Stylus NX415 printer.
Download Epson Stylus Nx415 Scanner Software

Epson Stylus NX415 Firmware Download

There is no firmware file for the Epson Stylus NX415 printer on the official Epson website. So, you cannot update the printer firmware.

Epson Stylus Nx415 Firmware Update

The Epson Stylus NX415 printer firmware cannot be downgraded. 

Epson Stylus NX415 Setup Troubleshooting Guidance

If you have a problem with the Epson NX415 printer, check for the LCD panel’s error message to diagnose. The troubleshooting steps to some of the commonly occurring problems are given on this page. If you need assistance in resolving the printer problems, click the Call button to contact our technical experts.

Epson Stylus Nx415 Offline Solution

When you see the Printer is Offline error message while printing from your computer, perform the following steps.

  1. Ensure the Epson Stylus NX415 setup is turned on.
  2. Check for any error messages on the LCD panel. If you find any, resolve the issue.
  3. Make sure the correct printer is selected for printing. 
  4. The USB cable must be a shielded AB cable and it is length should be less than 10 feet.
  5. Most importantly, do not use a USB hub for connecting the printer to your computer.
  6. Try to connect to a different USB port on the computer.

Fix Epson Stylus Nx415 Paper Jam Error

If you see the Paper jam error message on the LCD panel, perform the following steps to resolve it.

  1. Take out the jammed paper from the Epson Stylus NX415 setup’s output tray or sheet feeder.
  2. If the paper is jammed inside the printer, turn off the Epson Stylus NX415 printer and open the scanner.
  3. Pull out the paper that is stuck inside the printer. Make sure to clear any torn pieces in the cartridge area.
  4. Lower the scanner and turn on the Epson printer.

Solve Epson Stylus Nx415 not Printing

Basic troubleshooting

  1. Check if the Power LED on the printer is turned on. If not, power up the Epson Stylus NX415 printer.
  2. Ensure the Epson Stylus NX415 setup is not tilted.
  3. Ensure the USB cable is connected correctly between the printer’s rear port and your computer’s USB port.
  4. If the USB cable you are using is damaged, use a new one for the connection.

Run a printer check

  1. Disconnect the USB cable from the Epson printer and computer. 
  2. Load some paper into the sheet feeder.
  3. Press Setup and select Maintenance -> Nozzle Check.
  4. Press OK -> Start. The Epson printer starts to print a nozzle check pattern page.
  5. If it prints, the problem is not with the printer. In such a case, you have to check if the printer software is installed correctly on the computer.
  6. Re-install the printer software and check if you can print.
  7. If you hear a printing sound but the Epson Stylus NX415 setup prints nothing, you need to clean the print head nozzles. 

Fix Epson Stylus Nx415 not Printing Black

  1. Check if the print settings are correct as per the required print job.
  2. Try cleaning the print head nozzles. To do this, carry out the steps given below.
  3. Place a few sheets of paper in the sheet feeder.
  4. Perform one of the following instructions depending on your computer’s Operating System.
  5. Instruction 1 – On Windows – Go to the taskbar and right-click the Epson printer icon. Click the Head Cleaning option.
  6. Instructions 2 – On Mac – Navigate to the Applications folder and launch Epson Printer Utility3. Choose the Epson Stylus NX415 printer and click Head Cleaning.
  7. Carry out the instructions on the screen to clean the print head. Wait until the Power LED stops flashing. 
  8. Select the Print Nozzle Check Pattern option followed by the Print option.
  9. If there are gaps in the pattern, click the Clean option.
  10. Note: You cannot clean the Epson Stylus NX415 setup’s print head if any of the ink cartridges has expended or is low. In such a case, you have to replace the ink cartridge. 

Fixed: Epson Stylus NX415 Cannot Recognize Ink Cartridges

Usually, this error appears after only installing the ink cartridges.

The main reason for this error is improper placement of the ink cartridges. Reinsert them as per the following steps.

  1. Open the Epson Stylus NX415 printer’s scanner.
  2. Take out the ink cartridges and then reinsert them correctly in the holder.
  3. Now, check if the error message resolves. 
  4. If so, it indicates that you are using non-genuine Epson ink cartridges.
  5. Install only genuine ink cartridges for problem-free printing.

How To Reset Epson Stylus NX415 Printer?

  1. Press the Setup button on the Epson Stylus NX415 printer’s control panel.
  2. Select the Restore Default Settings option using the navigation button.
  3. Press the OK button twice.
  4. All the Epson Stylus NX415 setup’s control panel settings will be reset to their default settings.