Epson Stylus Pro 1400 Setup

1. First, open the product box and check whether the components such as Epson Stylus Pro 1400 printer, setup CD, quick setup guide, and ink cartridges are present inside the pack. If yes, continue with the below instructions. If not, contact your printer dealer or manufacturer.
2. Clear all the packing tapes present around the printer. 
3. Connect the printer to an electrical outlet.
4. Press the Power button to turn ON the printer.
5. Open the top cover followed by the ink cartridge cover.
6. Take the ink cartridges out of their packages and place them into their slots.
7. Close the cartridge cover followed by the printer cover.
8. Now, press the Ink button to charge the ink. It may take around 3 minutes for the ink charging process to complete.

9. Open the printer’s paper support.
10. Similarly, open the output tray. Make sure to pull out the extension of the paper support and the output tray. 
11. Load a stack of plain paper in the paper support. Align the paper edge guide correctly. 
12. The Epson Stylus Pro 1400 setup has been completed. 
13. Now, install the printer software on your computer.
14. Make sure to select the correct connection type during the driver installation process.
15. Finally, try a test print.

Epson Stylus Pro 1400 Driver for Mac

Driver Download:

1. To download the manufacturer recommended printer driver for your Mac computer from this site, click the Driver Download button provided on this screen.
2. You can also download the driver from the official Epson site.

Driver Installation:

Epson Stylus Pro 1400 Driver for Windows

Driver Download:

1. Visit Epson’s official site.
2. Search and select the Epson Stylus Pro 1400 printer.
3. On the printer’s support page, click the Downloads tab.
4. If required, select your OS type from the drop-down menu.
5. Choose the printer driver that you wish to install and click Download.

Driver Installation:

1. On your Windows computer, open the Epson Stylus Pro 1400 printer driver.
2. Select the printer driver that you wish to install.
3. When prompted, select the Install driver for standard USB (recommended) option and connect your Epson Stylus Pro 1400 setup to the Windows computer using a USB cable.
4. Perform the on-screen instructions to complete the driver installation.

Epson Stylus Pro 1400 Manual Download

1. Click the Manual Download button provided on this web page.
2. A soft copy of the Epson Stylus Pro 1400 setup’s user guide will be downloaded on your computer.

Guidance: Epson Stylus Pro 1400 Wireless Setup

The Epson Stylus Pro 1400 printer doesn’t support the Wi-Fi interface. It only supports the USB cable connection. The below section explains how to configure the Epson Stylus Pro 1400 printer over a USB cable connection on Windows.

1. First, get a USB cable that is compatible with your Epson printer.
2. Open the Epson Stylus Pro 1400 printer driver.
3. Click the Install button.
4. Select the Install driver for standard USB (recommended) option. 
5. Connect the Epson Stylus Pro 1400 setup to your computer using the USB cable.
6. Complete the printer driver installation process by following the on-screen instructions.

How To Replace Ink Cartridge Epson Stylus Pro 1400?

Epson Stylus Pro 1400 Print Head Replacement

1. First, power off your Epson Stylus Pro 1400 setup if it is turned ON.
2. Unplug all the power cables from the printer, including the power cable.
3. Now, locate and remove the IEEE cover from the back of the printer.
4. Remove the screws mounting the IEEE cover.
5. Take the rear cover out of the printer.
6. Gently take the paper support out of the printer.
7. Open the printer’s front cover.
8. Remove the mounted screws.
9. Unplug the cables on the side. 
10. Move the cartridge unit to the center of your printer.
11. Take the print head out of your printer.
12. Unpack the new print head and place it in the slot.
13. Reconnect the cables. Mount the screws correctly. 
14. Close the rear cover, cartridge cover, and printer cover.
15. Connect the printer to the power outlet and turn it ON.
16. Perform the on-screen instructions to complete the replacement process.

Epson Stylus Pro 1400 Print Setup

1. Initially, make sure that you have configured your Epson printer.
2. Check if your Epson Stylus Pro 1400 setup and computer are connected securely using a USB cable.
3. Make sure that you have installed the printer driver on your computer.
4. Check whether the paper support contains enough paper to perform the print operation.
5. Fill the paper support with enough paper if required. 

Steps: Epson Stylus Pro 1400 Canvas Printing

1. Load the correct paper type in the paper support.
2. Open the photo you want to print on your computer.
3. Click the Print option.
4. Select your printer and set the print preferences as per your desire.
5. Finally, click the Print button. Now, the photo will be printed.

Epson Stylus Pro 1400 Borderless Printing

1. On your Windows, open the photo that you want to print.
2. Click the Print option on the application screen.
3. On the Picture Selection Wizard screen, select your Epson Stylus Pro 1400 setup and click Printing Preferences. 
4. On the print properties dialog box, click the checkbox beside the Borderless option.
5. Select the other print preferences as per your desire.
6. Finally, click the OK button.
7. Now, your photo will be printed as per the selected settings.

Epson Stylus Pro 1400 Firmware Update

Firmware update using IPL USB Sender on Windows 

1. First, put your Epson Stylus Pro 1400 setup in the UPDATE MODE. To do so, hold down the Paper, Ink, and Power button at the same time. Release the buttons once the LEDs turn ON.
2. Now, open the IPS USB Sender file on your Windows computer.
3. Select Select Port > 1st ROM File > Data File and click Transfer. 
4. Perform the on-screen instructions to complete the printer firmware update process.
5. Once the printer update process has been completed, restart your printer.

Epson Stylus Pro 1400 Offline

1. First, check whether your printer is turned ON or not. If not, turn it ON.
2. Make sure that the printer and your computer are connected firmly.
3. Check whether you have selected the correct printer while configuring the print operation. If not, select the printer correctly. 
4. Try restarting your Epson Stylus Pro 1400 setup. 
5. If the USB cable that you’re using is damaged, then replace it with a new one. If you encounter the Printer Offline issue while using the new USB cable, then connect the cable to a different USB port on your computer.
6. Make sure that you have installed the Epson Stylus Pro 1400 printer driver successfully. 
7. If none of the above troubleshooting instructions could resolve the printer offline issue, then reset your printer.

Fixed: Epson Stylus Pro 1400 Paper Jam

1. As soon as you see the Paper Jam error on your printer’s LCD screen, restart your printer because this error occurs due to fatal errors as well.
2. If the Paper Jam error message is displayed on the printer’s LCD screen even after restarting the printer, then press the Paper button on the printer’s control panel.
3. Now, check whether the paper jam error is cleared. 
4. If not, turn off your Epson Stylus Pro 1400 setup.
5. Open the printer cover.
6. Gently take the jammed paper out of the printer.
7. After clearing all the jammed paper, close the printer cover and turn on the printer.
8. Now, check whether the error Paper Jam is displayed on the screen. If yes, contact us.

Steps: Epson Stylus Pro 1400 Factory Reset

Factory resetting the printer using the Epson Ink Pad Reset utility

1. Download and run the Epson Ink Pad Reset Utility on your computer.
2. Click Next > Next.
3. When prompted, confirm your Epson Stylus Pro 1400 setup and click the Next button.
4. Once the Epson printer has been reset to factory settings, a confirmation message will be displayed on the screen.

Uninstalling the printer driver

1. Make sure that your Epson Stylus Pro 1400 setup is turned OFF.
2. Now, go to your Mac computer’s System Preferences section.
3. Select Print & Fax > “your Epson printer”. 
4. Click the minus icon beside your printer followed by the Delete Printer button.
5. Now, go to the hard drive section.
6. Select the Library option followed by Printers. 
7. Choose and delete the Epson printer folder.
8. In the Library window, select Printers > PPD > Contents > Resources.
9. Choose and delete the following file “Epson Printer Name”.gz.
10. Now, go to the Cache folder in the Library window. 
11. Delete the Epson folder stored in the Cache folder.
12. Now, restart your Mac computer.

Reinstalling the printer driver

1. Power on your Epson Stylus Pro 1400 setup.
2. Go to the printer’s official site and download the printer driver file.
3. Open the downloaded printer driver file on your computer.
4. Perform the on-screen instructions to complete the driver installation.
5. After installing the printer driver, run a test print and check whether the Filter Failed issue is resolved.

Epson Stylus Pro 1400 Paper Feed Problems

1. Make sure that the loaded media type is supported by the printer.
2. Check if the paper support extension is pulled up correctly. If not, pull it out and then reload the paper in the paper support.
3. If the loaded paper is curled, crashed, wrinkled, or too thin, then remove and reload the paper.
4. If the paper jam error is displayed on your printer’s LCD screen, then press the Paper button to clear it. 

Epson Stylus Pro 1400 Print Head Cleaning Failure

1. Make sure that your Epson Stylus Pro 1400 setup is turned ON while performing the cleaning process.
2. Confirm that the Red ink light is not blinking while performing the cleaning process. If it is blinking, then you need to replace the cartridge. 
3. Restart your printer and then re-perform the print head cleaning process. 
4. After cleaning the print head, make sure to turn off the printer and wait for at least 6 hours. 
5. Turn on your printer and check if the print head cleaning failure issue is resolved.

Epson Stylus Pro 1400 Not Printing Black

1. If the Epson Stylus Pro 1400 printer is not printing in black, then check the black ink cartridge status.
2. If the black cartridge is empty or low, then replace it with a new one.
3. Make sure that you have selected the Black/White or Grayscale option while setting the print preferences. 
4. Check whether the black cartridge is placed correctly or not. If not, reinsert the cartridge and then perform the print operation.
5. Make sure that you have inserted the recommended ink cartridge on the Epson Stylus Pro 1400 setup.