Notice: Undefined index: dir in /home/printers/supportassistant.us/wp-content/plugins/LayerSlider.disable/classes/class.ls.sources.php on line 128
fw-1

PRINTER SETUP

PRINTER INSTALLATION

PRINTER REPAIR

Epson Pro WF 4630

How To Do Epson Wf-4730 Setup?

The Epson WF-4730 printer supports print, fax, copy, and scan functions. The printer can give out extraordinary prints with the correct paper type. You can access the printer over a wired or wireless connection. To perform the Epson Wf-4730 setup, follow the below steps.

Unpacking

  1. Check if all the essential printer accessories are included in the box.
  2. All the protective materials have to be removed from the outside as well as from the inside of the printer.
  3. Turn on your Epson printer
  4. Establish a connection between the Epson WF-4730 printer and an electrical outlet using a power cord.
  5. Lift the printer’s control panel and press the Power button to turn on the printer.
  6. Specify your language, country, and time on the control panel.
  7. Note: You can even change these settings at any time.

Installing Ink Cartridges

  1. Open the Epson Wf-4730 setup’s scanner unit.
  2. Hold a new ink cartridge, shake it well, and unpack it.
  3. Place and push the ink cartridge in its slot.
  4. Repeat the same to install the rest of the ink cartridges.
  5. Close the printer’s scanner unit properly.
  6. Wait until the printer completes ink charging.

Loading Paper

  1. Lower the control panel and raise the output tray.
  2. Draw out the printer’s paper cassette.
  3. Move the side edge guides and load enough paper with its printable side facing down into the paper cassette.
  4. Align the side edge guides and place the paper cassette.
  5. Lower the output tray and pull the output tray extension out from the printer.
  6. Set the paper settings on the control panel.

Fax Setup

  1. If you want to use the Epson WF-4730 printer for faxing, establish a connection between a wall jack and the printer using a phone cord.
  2. Note: You can even perform a fax setup later.

Epson WF-4730 Driver Download

Steps to know how to do Epson Wf-4730 setup for downloading the driver.

Method 1:

Download the Epson WF-4730 printer driver by clicking the Driver Download button on this page.

Method 2:

  1. Access the official Epson web page and search for the Epson WF-4730 printer.
  2. Navigate to Downloads -> Recommended For You.
  3. Check if the correct computer’s OS has been selected in the Operating System field.
  4. Select the Download option beside Drivers and Utilities Combo Package Installer.

Epson WF-4730 Manual Download

Method 1

Download a soft copy of the Epson Wf-4730 setup manual by clicking the Manual Download button given on this page.

Method 2

  1. Visit the official Epson website and enter your printer name in the search field.
  2. Go to Manuals and Warranty and click PDF next to your preferred manual.
  3. The downloaded manual will be saved in the computer’s default Downloads folder.

Install Epson WF-4730 Driver

Procedure to do Epson Wf-4730 setup for driver installation.

  1. Place the product CD in the computer’s CD drive.
  2. If you do not have the product CD or your computer does not have a CD drive, you can download the printer driver from the official Epson web page.
  3. Open the downloaded printer setup file and follow the on-screen wizards.
  4. When the ‘Select Your Connection’ window appears, choose the Wireless Connection, Direct USB Connection, or Wired Network Connection option.
  5. Continue with the rest of the on-screen instructions to finish the installation.

Epson WF-4730 Wireless Setup

  1. Keep your router turned on.
  2. Press the Wi-Fi icon on the Epson Wf-4730 setup’s control panel.
  3. Select Wi-Fi (Recommended) -> Start Setup or Change Settings -> Wi-Fi Setup Wizard.
  4. Choose the name of your network.
  5. Note: If your network name is not shown on the display panel, select Enter Manually and type the SSID correctly.
  6. Navigate to the Password field, type the network key (password) correctly, and press OK.
  7. Once connected to the network. you will see the network details on the display panel. Confirm them by selecting the Start Setup option.
  8. If necessary, select the Print Check Report option to print a network setup report.
  9. Exit the wireless setup wizard.

Epson WF-4730 Print from iPhone

Carry out the instructions below to do Epson Wf-4730 setup for printing on iPhone.

  1. Load some paper into the printer’s paper cassette.
  2. Perform the wireless setup on the printer.
  3. Connect your iPhone to Wi-Fi.
  4. Note: Both your iPhone and the printer must be connected to the same wireless network.
  5. On the iPhone, open a photo to print and tap the Share icon followed by the Print option.
  6. Select the Epson WF-4730 printer and set the number of copies to print.
  7. Once you tap Print, the printer starts to print the photo.

Epson WF-4730 Fax Setup

  1. Plug a phone cable into a telephone wall jack and the printer’s LINE port.
  2. Establish a connection between your telephone/answering machine and the printer’s EXT port using another phone cable.
  3. Navigate to the Settings menu on the control panel.
  4. Select General Settings -> Fax Settings -> Fax Setting Wizard -> Proceed.
  5. Type the sender name followed by the fax number using the keypad.
  6. Set a distinctive ring and receive mode.
  7. Confirm the settings by selecting the Proceed option.
  8. Select the Start Checking option and carry out the LCD panel instructions.
  9. Make sure to set the line type correctly.

Epson WF-4730 Scanner Setup

Follow the steps to do Epson Wf-4730 setup for scanner

You can scan from the printer’s control panel, using the scanning program on your computer, or from a smart device. The detailed instructions to perform scanning from the control panel and scanning program on the Epson WF-4730 printer are provided below.

Epson WF-4730 Scan to Computer

  1. Place your original document on the scanner glass.
  2. On the Epson WF-4730 printer’s control panel, select the Scan option followed by the Computer option.
  3. If you see the information screen, select the OK option.
  4. Choose the ‘Select a computer’ option.
  5. If you have connected the printer over a network, select the connected computer’s name.
  6. If you have connected the printer to your computer using a USB cable, select the USB Connection option.
  7. Choose the Save as PDF option and then select the Save as PDF or Save as JPEG option.
  8. Select the Save option.
  9. The printer begins to scan the document. Once done, the scanned document will be sent as PDF or JPEG to the connected computer.

Epson WF-4730 Scan to Email Setup

Refer to the steps to do Epson Wf-4730 setup for email scanning

  1. Select Settings -> General Settings -> Network Settings -> Advanced -> Email Server -> Server Settings.
  2. Choose your preferred authentication method.
  3. Select Proceed -> Close -> Connection Check.
  4. Place a document on the printer’s scanner area.
  5. Select Scan -> Email.
  6. Choose the email address from the Contacts list or Scan history.
  7. Note: You can even type the email address manually by selecting the Keyboard option.
  8. Select the Scan Settings option and choose the file format.
  9. If needed, set additional scan settings.
  10. Press the Preset button followed by the Send icon.
  11. The printer scans the document and sends it to the specified email address.

Epson WF-4730 Scan Software

  1. Place a document either on the scanner glass or in the Automatic Document Feeder (ADF).
  2. Launch the scanning program on your computer.
  3. Set your scan preferences.
  4. Select the Epson WF-4730 printer if necessary.
  5. Click Scan to scan the document as per the specified scan settings.
  6. Note: The Epson scanning program can be downloaded from the official Epson website.

Epson WF-4730 Double-Sided Scanning

Guide to do Epson Wf-4730 setup for printing double side.

  1. Load your original document into the printer’s Automatic Document Feeder (ADF).
  2. On the control panel, select Scan and choose the preferred scan method.
  3. Press the Menu button and select the Scan Settings option followed by the 2-sided Scanning option.

Epson WF-4730 Scan Multiple Pages

  1. Place your document in the printer’s Automatic Document Feeder.
  2. Launch Epson Scan 2 on your computer.
  3. Click the Main Settings tab.
  4. Fill the Document Source, Document Size, Image Type, Resolution fields correctly.
  5. Choose the PDF or Multi-TIFF option from the Image Format drop-down menu.
  6. Type the name of your file in the File Name field.
  7. Specify the location to save the scanned document in the Folder field.
  8. If necessary, preview the document by clicking the Preview button.
  9. The Epson WF-4730 printer begins to scan once you click the Scan option.

Epson WF-4730 Maintenance Box Reset

steps to do Epson Wf-4730 setup for resetting the box

  1. Cancel the on-going print job, if any.
  2. On the maintenance box cover, press the tab.
  3. Remove the used maintenance box.
  4. Unpack a new maintenance box and place it in its holder correctly.
  5. Press the tab again on the maintenance box cover. The box is now reset.

Epson WF-4730 Firmware Downgrade

  1. Download the previous firmware version of the Epson WF-4730 printer from the official Epson site.
  2. Locate the downloaded file on your computer and double-click it.
  3. Perform the on-screen guidelines to complete the installation.
  4. Now, the printer firmware is downgraded to the previous version.

Epson WF-4730 Firmware Update

Windows

  1. Launch the Epson Software Update on your Windows computer.
  2. If needed, select the Epson Wf-4730 setup.
  3. Checkmark the box beside the Firmware Updater option and then click Install.
  4. Select Yes -> Agree -> OK.
  5. When the Epson Firmware Updater screen appears, select the Start option.
  6. Wait until you see the ‘The Firmware update is complete’ message in the Detailed Information section.
  7. Click OK in the Epson Software Updater dialog box.

Mac

  1. Go to the Applications folder and click Epson Software.
  2. Note: If you have not installed the Epson Software Updater utility, download it from the official Epson website.
  3. Select the checkbox next to Epson Firmware Update and click the Install option.
  4. Click Agree in the ‘Software License Agreement’ window.
  5. Type the Mac administrator name and password in the User Name and Password fields, respectively.
  6. Click OK to proceed further.
  7. Double-click the Epson Firmware Updater icon.
  8. Click I Agree -> Next -> Start -> OK.
  9. Once done with updating the firmware, click Finish and exit the Epson Software Updater utility. If you need remote assistance for Epson Wf-4730 setup, click the call button available on the screen.