HOW TO CONFIGURE EPSON ET-2750 WIRELESS SETUP?

Epson Expression 2750 is an excellent wireless printer that is used by most people due to its effective EcoTank ink system. The Epson printer comes with a flatbed scanner, so it will take a long duration to scan a large volume of data – missing automatic document feeder (ADF). The super tank is easy to access and is visible. On the upside, the display console can be tilted for better visibility from different angles. The rear paper input tray makes adding extra sheets easy for the end-user without interrupting an active print job. Here we will see the Epson Expression 2750 printer scanner setup in more detail. Keep reading this page to know how to configure Epson Et-2750 wireless setup.

EPSON ET-2750 WIRELESS SETUP

Wireless network settings from the printer control panel:

  • On your printer control panel, press the Home button.
  • Select Wi-Fi setup and press OK.
  • Choose the Wi-Fi (Recommended) option and press the OK button twice.
  • Select Wi-Fi Setup Wizard and press OK.

Note: If your wireless network’s name is not shown, enter it manually. Enter the wireless network name manually by selecting Other SSIDs and pressing OK.

  • Enter your Wireless password.
  • Press the Start button on your Epson ET-2750 to print a network setup report. 
  • Press OK to exit.

Enable Wi-Fi Direct mode:

You should enable Wi-Fi Direct mode to allow direct communication between your printer and computer without a wireless router. Follow the below steps to enable Wi-Fi Direct mode.

  • On the printer control panel, press the Home button.
  • Select Wi-Fi setup and press OK.
  • Choose the Wi-Fi Direct option and press the OK button until the network name and password appear on the LCD screen.
  • Press the down arrow and then the OK button to change the Wi-Fi Direct password.
  • Enter the Wi-Fi Direct password and press OK.
  • Enable Wi-Fi and select your printer’s Wi-Fi network name on your computer.
  • Enter the password shown on the printer’s LCD and press OK.

Wi-Fi Protected Setup (WPS):

Using a WPS-enabled wireless router, you can quickly connect your Epson printer to the network using Wi-Fi Protected Setup. Follow the below steps to configure Epson ET-2750 wirelessly using the WPS method.

  • Press the WSP button on your router.
  • On your Epson ET-2750, press the Home button.
  • Select Settings > Network Settings > Wi-Fi Setup.
  • Select the Push button and press OK.
  • Follow the commands appearing on the LCD screen to complete the WPS setup.
  • If the connection is successful, the Wireless icon will display on the LCD.

You are done with the Epson ET-2750 wireless setup. Try to print using your Epson ET-2750 printer and enjoy the printing experience. If you cannot set up the Epson ET-2750 printer wirelessly, contact our technical support to know how to configure Epson Et-2750 wireless setup.