How To Configure Epson Stylus Nx230 Printer Setup?

Are you looking for a clear-cut method to set up your Epson printer? You have reached the correct destination to make your printer setup easier than ever before. Keep reading the instructions below to learn how to configure the Epson stylus Nx230 printer setup for the first time setup.

Let’s get into unboxing:

  1. First, take out the printer from the package.

  2. Check the printer components.

  3. Remove the protective tapes and covers from the printer.

  4. Next, connect your printer to a wall outlet using the provided power cord.

  5. Raise the control panel and press the Power button to turn on the printer.

Let’s install the ink cartridges:

  1. Lift the scanner unit and hold it to its locking position.
  2. Gently shake the ink cartridges before you unpack them.
  3. Remove the protective seals from the cartridges without touching the nozzle parts.
  4. Insert each ink cartridge into the cartridge holder and close the scanner unit.
  5. Press the Stop button to start the ink delivery system.

Once the ink charging is completed, you can configure your Epson Stylus NX230 printer for paper setup and software installation.

Let’s start loading the paper:

  1. To begin with, flip the feeder guard forward and raise the paper support.
  2. Open the paper output tray and then flip the paper stopper.
  3. Slide the paper guide towards the left.
  1. Fan a paper stack and load it into the paper input tray.
  2. Slide the paper guide towards the right to adjust the paper stack.
  3. Flip the feeder guard and proceed to install the printer software on your computer.

Installing the printer software:

  1. Insert the software installation disc that came with your printer into your computer’s CD/DVD drive.
  2. Run the setup file from the CD drive.
  3. On Windows, click Yes if the device prompts for User Account Control.
  4. On Mac, enter the administrator password in the available field and click Continue.
  5. Agree to the EULA to proceed.
  6. Install the required software by selecting them in the driver installation wizard.
  1. Choose either Wireless Connection or Direct USB Connection as your connection type.
  2. Carry out the on-screen instructions and establish the connection between your printer and computer.
  3. Once the connection is made, add your printer to your computer and print a test page to verify the setup.

In case you are stuck while configuring your Epson Stylus NX230 printer for the first time setup, contact our technical experts for assistance in resolving it.