How To Downgrade Epson XP-440 Firmware?

 
  1. Quick steps to downgrade Epson XP-440 Firmware. Search for the older firmware of the Epson XP 440 printer on the web browser and download it on the computer.
  2. Switch on the printer and connect one end of a USB cable to it.
  3. On the Windows 8/10 computer, press & hold the Shift key and select the Restart option from the Power menu.
  4. This leads to the blue screen on the computer.
  5. Select Troubleshoot from the options.
  6. Next, click on the Advanced options menu.
  7. Then, choose Startup Settings under the Advanced options menu.
  8. Click on the Restart button to proceed and then select the desired option by pressing the corresponding function key (F4 or F5 or F6) below the Startup Settings caption.
  9. Now, the system restarts in Safe/Recovery mode immediately connects the other end of the USB cable to the computer.
  1. Open the scanner unit and then slowly remove all the ink cartridges from the printer.
  2. Power off the printer and wait until the printer is shut down.
  3. Next, press the Stop, Left arrow, Home, and Power buttons simultaneously, then release the buttons when the message “Program Update Mode” appears on the printer’s display.
  4. Run the Epson firmware on the computer through the guided instructions and start the firmware downgrade.
  5. When the firmware is being transferred to the printer, the power light on the printer keeps on flashing.
  6. After the firmware transfer is done, the message “FINISHED” is displayed on the printer’s screen.
  7. Then, press the OK button and power off the printer.
  8. Again, switch on the printer and install the ink cartridges in the printer.
  9. Continue to print with the printer.